MAY 2009 CCNA Exploration 4.0 ESwitching Chapter 4 - LAN Switching and Wireless

 updated: MAY 2009 by bluefiz 100%

1         

Refer to the exhibit. Switches SW1 and SW2 are interconnected via a trunk link but failed to exchange VLAN information. The network administrator issued the show vtp status command to troubleshoot the problem. On the basis of the provided command output, what could be done to correct the problem?

            Switch SW2 must be configured as a VTP client.

            The switches must be interconnected via an access link.

            The switches must be configured with the same VTP domain name.

            Both switches must be configured with the same VTP revision number.

2         

Refer to the exhibit. Switch S1 is in VTP server mode. Switches S2 and S3 are in client mode. An administrator accidentally disconnects the cable from F0/1 on S2. What will the effect be on S2?

            S2 will retain the VLANs as of the latest known revision.

            S2 will automatically transition to VTP transparent mode.

            S2 will remove all VLANs from the VLAN database until the cable is reconnected.

            S2 will automatically send a VTP request advertisement to 172.17.99.11 when the cable is reconnected.

3         

What does a client mode switch in a VTP management domain do when it receives a summary advertisement with a revision number higher than its current revision number?

            It suspends forwarding until a subset advertisement update arrives.

            It issues an advertisement request for new VLAN information.

            It increments the revision number and forwards it to other switches.

            It deletes the VLANs not included in the summary advertisement.

            It issues summary advertisements to advise other switches of status changes.

4         

Which statement is true when VTP is configured on a switched network that incorporates VLANs?

            VTP is only compatible with the 802.1Q standard.

            VTP adds to the complexity of managing a switched network.

            VTP allows a switch to be configured to belong to more than one VTP domain.

            VTP dynamically communicates VLAN changes to all switches in the same VTP domain.

5         

Which two statements describe VTP transparent mode operation? (Choose two.)

            Transparent mode switches can create VLAN management information.

            Transparent mode switches can add VLANs of local significance only.

            Transparent mode switches pass any VLAN management information that they receive to other switches.

            Transparent mode switches can adopt VLAN management changes that are received from other switches.

            Transparent mode switches originate updates about the status of their VLANS and inform other switches about that status.

6         

Refer to the exhibit. S2 was previously used in a lab environment and has been added to the production network in server mode. The lab and production networks use the same VTP domain name, so the network administrator made no configuration changes to S2 before adding it to the production network. The lab domain has a higher revision number. After S2 was added to the production network, many computers lost network connectivity. What will solve the problem?

            Reset the revision number on S2 with either the delete VTP command or by changing the domain name and then changing it back.

            Re-enter all appropriate VLANs, except VLAN 1, manually on Switch1 so that they propagate throughout the network.

            Change S1 to transparent VTP mode to reclaim all VLANs in vlan.dat and change back to server mode.

            Change S2 to client mode so the VLANs will automatically propagate.

7         

Refer to the exhibit. All switches in the network participate in the same VTP domain. What happens when the new switch SW2 with a default configuration and revision number of 0 is inserted in the existing VTP domain Lab_Network?

            The switch operates as a VTP client.

            The switch operates in VTP transparent mode.

            The switch operates as a VTP server and deletes the existing VLAN configuration in the domain.

            The switch operates as a VTP server, but does not impact the existing VLAN configuration in the domain.

            The switch operates as a VTP server in the default VTP domain and does not affect the configuration in the existing VTP domain.

8         

What causes a VTP configured switch to issue a summary advertisement?

            A five-minute update timer has elapsed.

            A port on the switch has been shutdown.

            The switch is changed to the transparent mode.

            A new host has been attached to a switch in the management domain.

9         

Which two statements are true about VTP pruning? (Choose two.)

            Pruning is enabled by default.

            Pruning can only be configured on VTP servers.

            Pruning must be configured on all VTP servers in the domain.

            VLANs on VTP client-mode switches will not be pruned.

            Pruning will prevent unnecessary flooding of broadcasts across trunks.

10       

How are VTP messages sent between switches in a domain?

            Layer 2 broadcast

            Layer 2 multicast

            Layer 2 unicast

            Layer 3 broadcast

            Layer 3 multicast

            Layer 3 unicast

11       

What are two features of VTP client mode operation? (Choose two.)

            unable to add VLANs

            can add VLANs of local significance

            forward broadcasts out all ports with no respect to VLAN information

            can only pass VLAN management information without adopting changes

            can forward VLAN information to other switches in the same VTP domain

12       

Refer to the exhibit. All switches in the VTP domain are new. Switch SW1 is configured as a VTP server, switches SW2 and SW4 are configured as VTP clients, and switch SW3 is configured in VTP transparent mode. Which switch or switches receive VTP updates and synchronize their VLAN configuration based on those updates?

            All switches receive updates and synchronize VLAN information.

            Only switch SW2 receives updates and synchronizes VLAN information.

            Only switches SW3 and SW4 receive updates and synchronize VLAN information.

            SW3 and SW4 receive updates, but only switch SW4 synchronizes VLAN information.

13       

Refer to the exhibit. The switches in the exhibit are connected with trunks within the same VTP management domain. Each switch is labeled with its VTP mode. A new VLAN is added to Switch3. This VLAN does not show up on the other switches. What is the reason for this?

            VLANs cannot be created on transparent mode switches.

            Transparent mode switches do not forward VTP advertisements.

            VLANs created on transparent mode switches are not included in VTP advertisements.

            Server mode switches neither listen to nor forward VTP messages from transparent mode switches.

14       

Refer to the exhibit. Which two facts can be confirmed by this output? (Choose two.)

            If this switch is added to an established network, the other VTP-enabled switches in the same VTP domain will consider their own VLAN information to be more recent than the VLAN information advertised by this switch.

            This switch shows no configuration revision errors.

            This switch has established two-way communication with the neighboring devices.

            This switch is configured to advertise its VLAN configuration to other VTP-enabled switches in the same VTP domain.

            This switch is configured to allows the network manager to maximize bandwidth by restricting traffic to specific network devices.

15       

Refer to the exhibit. What information can be learned from the output provided?

            It verifies the configured VTP password.

            It verifies the VTP domain is configured to use VTP version 2.

            It verifies VTP advertisements are being exchanged.

            It verifies the VTP domain name is V1.

16       

Refer to the exhibit. Switch1 is not participating in the VTP management process with the other switches that are shown in the exhibit. What are two possible explanations for this? (Choose two.)

            Switch1 is in client mode.

            Switch2 is in server mode.

            Switch2 is in transparent mode.

            Switch1 is in a different management domain.

            Switch1 has end devices that are connected to the ports.

            Switch1 is using VTP version 1, and Switch2 is using VTP version 2.

17       

Which two statements are true about the implementation of VTP? (Choose two.)

            Switches must be connected via trunks.

            The VTP domain name is case sensitive.

            Transparent mode switches cannot be configured with new VLANs.

            The VTP password is mandatory and case sensitive.

            Switches that use VTP must have the same switch name.

18       

A network administrator is replacing a failed switch with a switch that was previously on the network. What precautionary step should the administrator take on the replacement switch to avoid incorrect VLAN information from propagating through the network?

            Enable VTP pruning.

            Change the VTP domain name.

            Change the VTP mode to client.

            Change all the interfaces on the switch to access ports.

19       

What statement describes the default propagation of VLANs on a trunked link?

            only VLAN 1

            all VLANs

            no VLANs

            the native VLAN

20       

Which three VTP parameters must be identical on all switches to participate in the same VTP domain? (Choose three.)

            revision number

            domain name

            pruning

            mode

            domain password

            version number

 updated: MAY 2009 by bluefiz 100%

 For image version, please send your request to lovestoryhouse@gmail.com. thx.
Disclaimer: This questionnaires are just for revision purpose!

MAY 2009 CCNA Exploration 4.0 ESwitching Chapter 3 - LAN Switching and Wireless

 updated: MAY 2009 by bluefiz 100%

1         

What happens to the member ports of a VLAN when the VLAN is deleted?

            The ports cannot communicate with other ports.

            The ports default back to the management VLAN.

            The ports automatically become a part of VLAN1.

            The ports remain a part of that VLAN until the switch is rebooted. They then become members of the management VLAN.

2         

What statement about the 802.1q trunking protocol is true?

            802.1q is Cisco proprietary.

            802.1q frames are mapped to VLANs by MAC address.

            802.1q does NOT require the FCS of the original frame to be recalculated.

            802.1q will not perform operations on frames that are forwarded out access ports.

3         

Switch port fa0/1 was manually configured as a trunk, but now it will be used to connect a host to the network. How should the network administrator reconfigure switch port Fa0/1?

            Disable DTP.

            Delete any VLANs currently being trunked through port Fa0/1.

            Administratively shut down and re-enable the interface to return it to default.

            Enter the switchport mode access command in interface configuration mode.

4         

Refer to the exhibit. The network administrator has just added VLAN 50 to Switch1 and Switch2 and assigned hosts on the IP addresses of the VLAN in the 10.1.50.0/24 subnet range. Computer A can communicate with computer B, but not with computer C or computer D. What is the most likely cause of this problem?

            There is a native VLAN mismatch.

            The link between Switch1 and Switch2 is up but not trunked.

            The router is not properly configured for inter-VLAN routing.

            VLAN 50 is not allowed to entering the trunk between Switch1 and Switch2.

5         

What switch port modes will allow a switch to successfully form a trunking link if the neighboring switch port is in "dynamic desirable" mode?

            dynamic desirable mode

            on or dynamic desirable mode

            on, auto, or dynamic desirable mode

            on, auto, dynamic desirable, or nonegotiate mode

6         

What are two characteristics of VLAN1 in a default switch configuration? (Choose two.)

            VLAN1 should renamed.

            VLAN 1 is the management VLAN.

            All switch ports are members of VLAN1.

            Only switch port 0/1 is assigned to VLAN1.

            Links between switches must be members of VLAN1.

7         

Refer to the exhibit. SW1 and SW2 are new switches being installed in the topology shown in the exhibit. Interface Fa0/1 on switch SW1 has been configured with trunk mode “on”. Which statement is true about forming a trunk link between the switches SW1 and SW2?

            Interface Fa0/2 on switch SW2 will negotiate to become a trunk link if it supports DTP.

            Interface Fa0/2 on switch SW2 can only become a trunk link if statically configured as a trunk.

            Interface Fa0/1 converts the neighboring link on the adjacent switch into a trunk link if the neighboring interface is configured in nonegotiate mode.

            Interface Fa0/1 converts the neighboring link on the adjacent switch into a trunk link automatically with no consideration of the configuration on the neighboring interface.

8         

What must the network administrator do to remove Fast Ethernet port fa0/1 from VLAN 2 and assign it to VLAN 3?

            Enter the no vlan 2 and the vlan 3 commands in global configuration mode.

            Enter the switchport access vlan 3 command in interface configuration mode.

            Enter the switchport trunk native vlan 3 command in interface configuration mode.

            Enter the no shutdown in interface configuration mode to return it to the default configuration and then configure the port for VLAN 3.

9         

Which two statements describe the benefits of VLANs? (Choose two.)

            VLANs improve network performance by regulating flow control and window size.

            VLANs enable switches to route packets to remote networks via VLAN ID filtering.

            VLANs reduce network cost by reducing the number of physical ports required on switches.

            VLANs improve network security by isolating users that have access to sensitive data and applications.

            VLANs divide a network into smaller logical networks, resulting in lower susceptibility to broadcast storms.

10       

Refer to the exhibit. The exhibited configurations do not allow the switches to form a trunk. What is the most likely cause of this problem?

            Cisco switches only support the ISL trunking protocol.

            The trunk cannot be negotiated with both ends set to auto.

            By default, Switch1 will only allow VLAN 5 across the link.

            A common native VLAN should have been configured on the switches.

11       

Refer to the exhibit. Company HR is adding PC4, a specialized application workstation, to a new company office. The company will add a switch, S3, connected via a trunk link to S2, another switch. For security reasons the new PC will reside in the HR VLAN, VLAN 10. The new office will use the 172.17.11.0/24 subnet. After installation, the existing PCs are unable to access shares on PC4. What is the likely cause?

            The switch to switch connection must be configured as an access port to permit access to VLAN 10 on S3.

            The new PC is on a different subnet so Fa0/2 on S3 must be configured as a trunk port.

            PC4 must use the same subnet as the other HR VLAN PCs.

            A single VLAN cannot span multiple switches.

12       

What is the effect of the switchport mode dynamic desirable command?

            DTP cannot negotiate the trunk since the native VLAN is not the default VLAN.

            The remote connected interface cannot negotiate a trunk unless it is also configured as dynamic desirable.

            The connected devices dynamically determine when data for multiple VLANs must be transmitted across the link and bring the trunk up as needed.

            A trunk link is formed if the remote connected device is configured with the switchport mode dynamic auto or switchport mode trunk commands.

13       

What statements describe how hosts on VLANs communicate?

            Hosts on different VLANs use VTP to negotiate a trunk.

            Hosts on different VLANs communicate through routers.

            Hosts on different VLANs should be in the same IP network.

            Hosts on different VLANs examine VLAN ID in the frame tagging to determine if the frame for their network.

14       

Refer to the exhibit. Which statement is true concerning interface Fa0/5?

            The default native VLAN is being used.

            The trunking mode is set to auto.

            Trunking can occur with non-Cisco switches.

            VLAN information about the interface encapsulates the Ethernet frames.

15       

Refer to the exhibit. How far is a broadcast frame that is sent by computer A propagated in the LAN domain?

            none of the computers will receive the broadcast frame

            computer A, computer B, computer C

            computer A, computer D, computer G

            computer B, computer C

            computer D, computer G

            computer A, computer B, computer C, computer D, computer E, computer F, computer G, computer H, computer I

16       

Refer to the exhibit. Computer 1 sends a frame to computer 4. On which links along the path between computer 1 and computer 4 will a VLAN ID tag be included with the frame?

            A

            A, B

            A, B, D, G

            A, D, F

            C, E

            C, E, F

17       

What is a valid consideration for planning VLAN traffic across multiple switches?

            Configuring interswitch connections as trunks will cause all hosts on any VLAN to receive broadcasts from the other VLANs.

            A trunk connection is affected by broadcast storms on any particular VLAN that is carried by that trunk.

            Restricting trunk connections between switches to a single VLAN will improve efficiency of port usage.

            Carrying all required VLANs on a single access port will ensure proper traffic separation.

18       

Refer to the exhibit. Which two conclusions can be drawn regarding the switch that produced the output shown? (Choose two.)

            The network administrator configured VLANs 1002-1005.

            The VLANs are in the active state and are in the process of negotiating configuration parameters.

            A FDDI trunk has been configured on this switch.

            The command switchport access vlan 20 was entered in interface configuration mode for Fast Ethernet interface 0/1.

            Devices attached to ports fa0/5 through fa0/8 cannot communicate with devices attached to ports fa0/9 through fa0/12 without the use of a Layer 3 device.

19       

A network administrator is removing several VLANs from a switch. When the administrator enters the no vlan 1 command, an error is received. Why did this command generate an error?

            VLAN 1 can never be deleted.

            VLAN 1 can only be deleted by deleting the vlan.dat file.

            VLAN 1 can not be deleted until all ports have been removed from it.

            VLAN 1 can not be deleted until another VLAN has been assigned its responsibilities.

20       

Refer to the exhibit. Computer B is unable to communicate with computer D. What is the most likely cause of this problem?

            The link between the switches is up but not trunked.

            VLAN 3 is not an allowed VLAN to enter the trunk between the switches.

            The router is not properly configured to route traffic between the VLANs.

            Computer D does not have a proper address for the VLAN 3 address space.

21

The network administrator wants to separate hosts in Building A into two VLANs numbered 20 and 30. Which two statements are true concerning VLAN configuration? (Choose two.)

The VLANs may be named

The network administrator may create the VLANs in either global configuration mode or VLAN database mode.

 updated: MAY 2009 by bluefiz 100%

 For image version, please send your request to lovestoryhouse@gmail.com. thx.
Disclaimer: This questionnaires are just for revision purpose!

MAY 2009 CCNA Exploration 4.0 ESwitching Chapter 2 - LAN Switching and Wireless

 updated: MAY 2009 by bluefiz 100%

1     

Where is the startup configuration stored?

       DRAM

       NVRAM

       ROM

       startup-config.text

2     

Which statement is true about the command banner login "Authorized personnel Only" issued on a switch?

       The command is entered in privileged EXEC mode.

       The command will cause the message Authorized personnel Only to display before a user logs in.

       The command will generate the error message % Ambiguous command: "banner motd" ” to be displayed.

       The command will cause the message End with the character “%” to be displayed after the command is entered into the switch.

3     

Which two statements are true regarding switch port security? (Choose two.)

       The three configurable violation modes all log violations via SNMP.

       Dynamically learned secure MAC addresses are lost when the switch reboots.

       The three configurable violation modes all require user intervention to re-enable ports.

       After entering the sticky parameter, only MAC addresses subsequently learned are converted to secure MAC addresses.

       If fewer than the maximum number of MAC addresses for a port are configured statically, dynamically learned addresses are added to CAM until the maximum number is reached.

4     

If a network administrator enters these commands on a switch, what will be the result?

Switch1(config-line)# line console 0

Switch1(config-line)# password cisco

Switch1(config-line)# login

       to secure the console port with the password "cisco"

       to deny access to the console port by specifying 0 lines are available

       to gain access to line configuration mode by supplying the required password

       to configure the privilege exec password that will be used for remote access

5     

When a collision occurs in a network using CSMA/CD, how do hosts with data to transmit respond after the backoff period has expired?

       The hosts return to a listen-before-transmit mode.

       The hosts creating the collision have priority to send data.

       The hosts creating the collision retransmit the last 16 frames.

       The hosts extend their delay period to allow for rapid transmission.

6     

A network administrator uses the CLI to enter a command that requires several parameters. The switch responds with "% Incomplete command". The administrator cannot remember the missing parameters. What can the administrator do to get the parameter information?

       append ? to the last parameter

       append a space and then ? to the last parameter

       use Ctrl-P to show a parameter list

       use the Tab key to show which options are available

7     

Which command line interface (CLI) mode allows users to configure switch parameters, such as the hostname and password?

       user EXEC mode

       privileged EXEC mode

       global configuration mode

       interface configuration mode

8     

Refer to the exhibit. The switch and the hub have default configurations, and the switch has built its CAM table. Which of the hosts will capture a copy of the frame when workstation A sends a unicast packet to workstation C?

       workstation C

       workstations B and C

       workstations A, B, C, and the interfaces of the router

       workstations B, C, D, E, F, and interfaces of the router

9     

Refer to the exhibit. The network administrator’s attempts to connect to Switch1 via Secure Shell are failing. What is most likely the problem?

       incorrect vty lines configured

       incorrect default gateway address

       incompatible Secure Shell version

       vty lines that are configured to allow only Telnet

10    

What happens when the transport input ssh command is entered on the switch vty lines?

       The SSH client on the switch is enabled.

       Communication between the switch and remote users is encrypted.

       A username/password combination is no longer needed to establish a secure remote connection to the switch.

       The switch requires remote connections via proprietary client software.

11    

When a switch receives a frame and the source MAC address is not found in the switching table, what action will be taken by the switch to process the incoming frame?

       The switch will request that the sending node resend the frame.

       The switch will issue an ARP request to confirm that the source exists.

       The switch will map the source MAC address to the port on which it was received.

       The switch ends an acknowledgement frame to the source MAC of this incoming frame.

12    

Refer to the exhibit. The exhibit shows partial output of the show running-config command. The enable password on this switch is "cisco." What can be determined from the output shown?

       The enable password is encrypted by default.

       An MD5 hashing algorithm was used on all encrypted passwords.

       Any configured line mode passwords will be encrypted in this configuration.

       This line represents most secure privileged EXEC mode password possible.

13    

Refer to the exhibit. The switch and workstation are administratively configured for full-duplex operation. Which statement accurately reflects the operation of this link?

       No collisions will occur on this link.

       Only one of the devices can transmit at a time.

       The switch will have priority for transmitting data.

       The devices will default back to half duplex if excessive collisions occur.

14    

Which two statements are true about EXEC mode passwords? (Choose two.)

       The enable secret password command stores the configured password in plain text.

       The enable secret password command provides better security than the enable password.

       The enable password and enable secret password protect access to privileged EXEC mode.

       The service password-encryption command is required to encrypt the enable secret password.

       Best practices require both the enable password and enable secret password to be configured and used simultaneously.

15    

Refer to the exhibit. What happens when Host 1 attempts to send data?

       Frames from Host 1 cause the interface to shut down.

       Frames from Host 1 are dropped and no log message is sent.

       Frames from Host 1 create a MAC address entry in the running-config.

       Frames from Host 1 will remove all MAC address entries in the address table.

16    

Refer to the exhibit. How many collision domains are depicted in the network?

       1

       2

       4

       6

       7

       8

17    

Refer to the exhibit. Which hosts will receive a broadcast frame sent from Host A?

       hosts A and B

       hosts B and C

       hosts D and E

       hosts A, B, and C

       hosts B, C, D, and E

       hosts A, B, C, D, E, and F

18    

Which two statements about Layer 2 Ethernet switches are true? (Choose two.)

       Layer 2 switches prevent broadcasts.

       Layer 2 switches have multiple collision domains.

       Layer 2 switches route traffic between different networks.

       Layer 2 switches decrease the number of broadcast domains.

       Layer 2 switches can send traffic based on the destination MAC address.

19    

Refer to the exhibit. What action does SW1 take on a frame sent from PC_A to PC_C if the MAC address table of SW1 is empty?

       SW1 drops the frame.

       SW1 floods the frame on all ports on SW1, except port Fa0/1.

       SW1 floods the frame on all ports on the switch, except Fa0/23 and Fa0/1.

       SW1 uses the CDP protocol to synchronize the MAC tables on both switches and then forwards the frame to all ports on SW2.

20    

What are two ways to make a switch less vulnerable to attacks like MAC address flooding, CDP attacks, and Telnet attacks? (Choose two.)

       Enable CDP on the switch.

       Change passwords regularly.

       Turn off unnecessary services.

       Enable the HTTP server on the switch.

       Use the enable password rather than the enable secret password.

updated: MAY 2009 by bluefiz 100% 

MAY 2009 CCNA Exploration 4.0 ESwitching Chapter 1 - LAN Switching and Wireless

updated: MAY 2009 by bluefiz 100%

1         

Which layer of the hierarchical network design model is refered to as the high-speed backbone of the internetwork, where high availability and redundancy are critical?

            access layer

            core layer

            data-link layer

            distribution layer

            network layer

            physical layer

2         

Link aggregation should be implemented at which layer of the hierarchical network?

            core only

            distribution and core

            access and distribution

            access, distribution, and core

3         

Which hierarchical design model layer controls the flow of network traffic using policies and delineates broadcast domains by performing routing functions between virtual LANs (VLANs)?

            application

            access

            distribution

            network

            core

4         

Which layer of the OSI model does an access layer LAN switch use to make a forwarding decision?

            Layer 1

            Layer 2

            Layer 3

            Layer 4

5         

What is the likely impact of moving a conventional company architecture to a completely converged network?

            Local analog phone service can be completely outsourced to cost-effective providers.

            The Ethernet VLAN structure is less complex.

            A shared infrastructure is created resulting in a single network to manage.

            QoS issues are greatly reduced.

            There is less bandwidth competition between voice and video streams.

6         

Which three features are commonly supported at the distribution layer of the Cisco hierarchical network model? (Choose three.)

            security policies

            Power over Ethernet

            switch port security

            quality of service

            Layer 3 functionality

            end user access to network

7         

A network administrator is selecting a switch that will operate at the network core. Which three features should the switch support for optimum network performance and reliability? (Choose three.)

            port security

            security policies

            10 Gigabit Ethernet

            quality of service (QoS)

            hot-swappable hardware

            Power over Ethernet (PoE)

8         

Which feature supports higher throughput in switched networks by combining multiple switch ports?

            convergence

            redundant links

            link aggregation

            network diameter

9         

Refer to the exhibit. What characteristic of hierarchical network designs is exhibited by having SW3 connected to both SW1 and Sw2?

            scalability

            security

            redundancy

            maintainability

10        

What statement best describes a modular switch?

            a slim-line chassis

            allows interconnection of switches on redundant backplane

            defined physical characteristics

            flexible characteristics

11        

A network technician is asked to examine an existing switched network. Following this examination, the technician makes recommendations for adding new switches where needed and replacing existing equipment that hampers performance. The technician is given a budget and asked to proceed. Which two pieces of information would be helpful in determining necessary port density for new switches? (Choose two.)

            forwarding rate

            traffic flow analysis

            expected future growth

            number of required core connections

            number of hubs that are needed in the access layer to increase performance

12        

Configuring communication between devices on different VLANs requires the use of which layer of the OSI model?

            Layer 1

            Layer 3

            Layer 4

            Layer 5

13        

For organizations that are implementing a voice over IP solution, what functionality should be enabled at all three layers of the hierarchical network?

            Power over Ethernet

            quality of service

            switch port security

            inter-VLAN routing

14        

Which hierarchical design characteristic would be recommended at both the core and distribution layers to protect the network in the case of a route failure?

            PoE

            redundancy

            aggregation

            access lists

15        

Refer to the exhibit. Beginning with HR servers and workstations, a network engineer is designing a new security structure for the network. Which set of policies adheres to the hierarchical network model design principles?

            Implement Layer 3 switching on S1 to reduce the packet processing load on D1 and D2. Install all security processing on S1 to reduce network traffic load.

            Configure port security options on S1. Use Layer 3 access control features on D1 and D2 to limit access to the HR servers to just the HR subnet.

            Move all HR assets out of the data center and connect them to S1. Use Layer 3 security functions on S1 to deny all traffic into and out of S1.

            Perform all port access and Layer 3 security functions on C1.

16        

At which heirarchical layer are switches normally not required to process all ports at wire speed?

            core layer

            distribution layer

            access layer

            entry layer

17        

Which two characteristics are associated with enterprise level switches? (Choose two.)

            low port density

            high forwarding rate

            high latency level

            support link aggregation

            predefined number of ports

18        

Which layer of the hierarchical design model provides a means of connecting devices to the network and controlling which devices are allowed to communicate on the network?

            application

            access

            distribution

            network

            core

19        

Which two features are supported at all three levels of the Cisco three-layer hierarchical model? (Choose two.)

            Power over Ethernet

            load balancing across redundant trunk links

            redundant components

            Quality of Service

            link aggregation

20        

A technician is attempting to explain Cisco StackWise technology to a client that is setting up three stackable switches. Which explanation accurately describes StackWise technology?

            StackWise technology allows up to eight ports to be bound together to increase available bandwidth.

            StackWise technology allows the switch to deliver power to end devices by using existing Ethernet cabling.

            StackWise technology allows the switch capabilities and ports to be expanded by the addition of line cards.

            StackWise technology allows up to nine switches to be interconnected via the use of a fully redundant backplane.

updated: MAY 2009 by bluefiz 100%

For image version, please send your request to lovestoryhouse@gmail.com. thx.
Disclaimer: This questionnaires are just for revision purpose!

How to Auto Start Thunder at Any Time 自动启动迅雷在任何时刻

maybe you are a collague who is stayed with a group of people or blah blah blah
and the most suck thing you are sharing with  most the streamyx or blah blah blah broadband.
So, they have their rule to ensure they can surf the net without any lag.
Their rule: Only can download from 12:00AM to 6:00AM..

You said this is a great rule, it can ensure the line at home smooth before 12:00AM
you can still googling or blah blah blah before 12:00AM
but...
you want download something but it can only start from 12:00AM, are you gonna to wait at there til 12:00 AM and finally can open the thunder or other download application? Ow man, it definitely wasting my time!!!

As a result, I will show this "auto way" to all of you. If you using my method, you can go sleep at 8:00pm also but the thunder application will automatic start and the download progress will continue on anytime. Sound great, right?Let's start our tutorial :)

ll let your download progress continue when your thunder application is start.

Open your command prompt(Start->Run->cmd). Enter the command above. Dun forget to get your own thunder application path! The time also can be change as you want.

After execute the command(press enter), you will get the red border message which show you are successfully added one job.

Well.. you can now go to sleep and wait your thunder start automatically. ^o^

How to automatic shutdown your computer??

the red border show the time you want before shutdown. For instance, 3600 mean after one hour your computer will auto shutdown. the time unit is in second.

*all above method are tested in window xp only. I am not sure other OS is compatible.

You are welcome to ask me question ^o^